Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 96169 | ELECTRIC BOAT CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 29.875 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | PLAIN |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FED SPEC ALL MATERIAL RESPONSES |
| MATT | MATERIAL | ALUMINUM OR COPPER OR NICKEL |
| AMDL | FIRST END DIAMETER | 1.7390 INCHES MINIMUM AND 1.7410 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 5 |
| AAHN | END SIMILARITY | IDENTICAL |
| CSPY | LARGEST STEP DIAMETER | 2.250 INCHES NOMINAL |